North American Systems
International
Where Innovation
Meets Solutions
North American Systems
International
Where Innovation
Meets Solutions
Reliable enterprise chassis switch with massive scalability The Force10 E1200 enterprise chassis switch is the flagship product of the Terascale E-Series switch/router models. This line of Gigabit Ethernet switching and routing hardware offers enterprise-class resiliency, scalability and performance. The Force10 E1200 features full L2 switching and L3 routing capabilities. Ideal for applications spanning LANs, MANs and WANs like Clustering, Grid Computing, Campus backbones, next-gen Internet Exchanges, and Metro Ethernet Services.
The E1200 features a unique non-block architecture that provides 56.25 Gbps bandwidth to each line card, as well as advanced queuing, jumbo frame support and multicasting, including:
IPv6 is also supported in the Force10 E1200, including:
The system control plane of the Force10 E1200 is distinct from the data plane, and offers three processors for each Route Processor Module (RPM).
This architecture enhances resiliency with built-in fault containment, protecting against problems like spanning tree loops and DoS attacks without disruption. In addition, all RPMs have a dedicated 100Mbps paths to each line card to prevent against the performance degradation that can occur with slow forwarding table updates.
Fault- tolerance is also enhanced with its passive copper backplane which has no single-point-of-failure. In addition, all RPMs, Switch Fabric Modules (SFMs) and power supplies (AC & DC) are redundant as well, and all memory in the E1200 is ECC/parity-protected. Serviceability and availability features are built into the Force10 Networks E1200, with hot-swappable key components and built-in cable management, in addition to front-side access to cabling and cards.
The unified operating software featured in all Force10 networking equipment, FTOS, allows the management of the E1200 to be simplified and supports advanced management functionality, including granular traffic monitoring, management & accounting and:
Congestion can be controlled via WRED & WFQ, and packets can filtered via ACLs, and metered and marked for rate limiting and policing. Advanced QoS features include egress rate shaping, weighted fair queuing, and up to 8 traffic classes/port for conditioning.
The system control plane of the Force10 E1200 is distinct from the data plane, and offers three processors for each Route Processor Module (RPM).
This architecture enhances resiliency with built-in fault containment, protecting against problems like spanning tree loops and DoS attacks without disruption. In addition, all RPMs have a dedicated 100Mbps paths to each line card to prevent against the performance degradation that can occur with slow forwarding table updates.
Fault- tolerance is also enhanced with its passive copper backplane which has no single-point-of-failure. In addition, all RPMs, Switch Fabric Modules (SFMs) and power supplies (AC & DC) are redundant as well, and all memory in the E1200 is ECC/parity-protected. Serviceability and availability features are built into the Force10 Networks E1200, with hot-swappable key components and built-in cable management, in addition to front-side access to cabling and cards.
The modular architecture of all the E-Series Terascale Force10 enterprise chassis, including the E1200, enabling the switching architecture to dynamically change to accommodate changing environments & requirements. The E1200 includes 14 line-card slots, and line-card in the E-Series are compatible across the entire line, designed to work in any E1200, E600, or E300 RPM.
The E1200 includes the ability to upgrade in the future to new Ethernet technologies such as 100 Gigabit Ethernet when needed. With a 5 Tbps backplane, this chassis has the ability to delivery 330Gbps throughput to each slot. This allows the upgrade to 40 or 100 Gigabit Ethernet to occur without forklift upgrades. Once the new technology is available, your infrastructure will be ready.
| Force10 Networks E12000 Power & Cooling Specifications | |
|---|---|
| Thermal Output | Maximum thermal output: 5,100 W (17,402 BTU/h) |
| Power Consumption | Maximum current draw per DC PEM: 150 A |
| AC Power Consumption | Nominal input voltage: 200-240 VAC 50/60 Hz |
| NEBS | RoHS-compliant, On board thermal and voltage monitoring, GR-63-Core: NEBS, physical protection, GR-1089-Core: EMC and Electrical Safety for Network Telecommunications Equipment, SR-3580 NEBS criteria levels (Level 3 compliance) |
Other Features
North American Systems has been providing IT solutions, sevices and hardware for over 15 years.
If you want learn more about what we can do for your IT, please contact us at 800-927-7474, or send us an email at sales@nasi.com to get in touch with one of our experienced account executives.
Print This Page
